Four arms bring rounded, tapered and faceted stacks into a varied chandelier silhouette. Pearl details contrast with a smooth topper on each stack.
Shipping included.
Dimensions
Fixture: 21.5 in high × 27.5 in wide, excluding the suspension cord.
Hardware: 12.0 in high × 24.0 in wide. Hardwired canopy: nominal 5.0 in diameter.
Measurements are approximate and rounded up to the nearest 0.5 inch.
Shape composition
Choose a filament color for all four stacks. Listed from the hardware toward the topper; each arm ends in a smooth Spill Topper.
Arm 1
Pitt Small and Chonk Small, both with Pearls.
Arms 2 & 4
Pitt Small and Hennin Small, both with Pearls.
Arm 3
Two Tantrum Small forms with Pearls.
Lighting
Four T30 E26 bulbs. Choose a connection before adding to cart.
Hardwired: 6.0 ft suspension cord and ceiling canopy. Plug-in: 15.0 ft cord and swag hooks.
Materials & Modularity
Each shape is 3D printed in glass-fiber-reinforced PETG, a polymer composite. Fine layer lines and subtle variations in texture are part of the printing process.
The modular shapes connect with a twist-lock system. You can swap or rearrange compatible pieces while keeping the fixture’s required fit and clearances. Before making changes, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Follow the assembly instructions for your fixture, and never force a connection or alter the electrical components.
Have a qualified electrician handle hardwired installation and any work on electrical connections.
Placement & Care
Suspend securely in a dry indoor space, following the installation instructions for your fixture. Keep away from radiators, fireplaces, stoves and other heat sources. Avoid prolonged direct sunlight and locations where heat builds up, such as a hot window ledge or enclosed sunroom. Excessive heat may soften or distort the printed shapes. Keep away from water, splashes, steam and condensation. Do not use outdoors or in wet or damp locations. Do not drape fabric or other objects over the fixture.
Before cleaning, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Dust gently with a soft, dry cloth. Avoid solvents, abrasive cleaners and scrubbing. Do not sand, drill or heat the printed shapes. If a shape cracks, warps or no longer locks securely, stop using the fixture and contact the studio before using it again.
Specifications & installation
Use the installation instructions for your selected connection.
Four arms bring rounded, tapered and faceted stacks into a varied chandelier silhouette. Pearl details contrast with a smooth topper on each stack.
Shipping included.
Dimensions
Fixture: 21.5 in high × 27.5 in wide, excluding the suspension cord.
Hardware: 12.0 in high × 24.0 in wide. Hardwired canopy: nominal 5.0 in diameter.
Measurements are approximate and rounded up to the nearest 0.5 inch.
Shape composition
Choose a filament color for all four stacks. Listed from the hardware toward the topper; each arm ends in a smooth Spill Topper.
Arm 1
Pitt Small and Chonk Small, both with Pearls.
Arms 2 & 4
Pitt Small and Hennin Small, both with Pearls.
Arm 3
Two Tantrum Small forms with Pearls.
Lighting
Four T30 E26 bulbs. Choose a connection before adding to cart.
Hardwired: 6.0 ft suspension cord and ceiling canopy. Plug-in: 15.0 ft cord and swag hooks.
Materials & Modularity
Each shape is 3D printed in glass-fiber-reinforced PETG, a polymer composite. Fine layer lines and subtle variations in texture are part of the printing process.
The modular shapes connect with a twist-lock system. You can swap or rearrange compatible pieces while keeping the fixture’s required fit and clearances. Before making changes, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Follow the assembly instructions for your fixture, and never force a connection or alter the electrical components.
Have a qualified electrician handle hardwired installation and any work on electrical connections.
Placement & Care
Suspend securely in a dry indoor space, following the installation instructions for your fixture. Keep away from radiators, fireplaces, stoves and other heat sources. Avoid prolonged direct sunlight and locations where heat builds up, such as a hot window ledge or enclosed sunroom. Excessive heat may soften or distort the printed shapes. Keep away from water, splashes, steam and condensation. Do not use outdoors or in wet or damp locations. Do not drape fabric or other objects over the fixture.
Before cleaning, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Dust gently with a soft, dry cloth. Avoid solvents, abrasive cleaners and scrubbing. Do not sand, drill or heat the printed shapes. If a shape cracks, warps or no longer locks securely, stop using the fixture and contact the studio before using it again.
Specifications & installation
Use the installation instructions for your selected connection.
Image 1 of 67
Image 2 of 67
Image 3 of 67
Image 4 of 67
Image 5 of 67
Image 6 of 67
Image 7 of 67
Image 8 of 67
Image 9 of 67
Image 10 of 67
Image 11 of 67
Image 12 of 67
Image 13 of 67
Image 14 of 67
Image 15 of 67
Image 16 of 67
Image 17 of 67
Image 18 of 67
Image 19 of 67
Image 20 of 67
Image 21 of 67
Image 22 of 67
Image 23 of 67
Image 24 of 67
Image 25 of 67
Image 26 of 67
Image 27 of 67
Image 28 of 67
Image 29 of 67
Image 30 of 67
Image 31 of 67
Image 32 of 67
Image 33 of 67
Image 34 of 67
Image 35 of 67
Image 36 of 67
Image 37 of 67
Image 38 of 67
Image 39 of 67
Image 40 of 67
Image 41 of 67
Image 42 of 67
Image 43 of 67
Image 44 of 67
Image 45 of 67
Image 46 of 67
Image 47 of 67
Image 48 of 67
Image 49 of 67
Image 50 of 67
Image 51 of 67
Image 52 of 67
Image 53 of 67
Image 54 of 67
Image 55 of 67
Image 56 of 67
Image 57 of 67
Image 58 of 67
Image 59 of 67
Image 60 of 67
Image 61 of 67
Image 62 of 67
Image 63 of 67
Image 64 of 67
Image 65 of 67
Image 66 of 67
Image 67 of 67