A horizontal pendant pairs a rounded stack with a double-faceted Tantrum stack across a frame. Pearl details follow the body shapes, while smooth Spill toppers finish both ends.
Shipping included.
Dimensions
Fixture: 9.5 in high × 41.0 in wide, excluding suspension cord and ceiling hardware.
Hardware width: 15.5 in.
Measurements are approximate and rounded up to the nearest 0.5 inch.
Shape composition
Choose a filament color for both stacks. From the hardware toward each topper: one end carries Pitt Small, Chonk Small and Spill Topper; the other carries two Tantrum Small shapes and Spill Topper.
Pearl details on the body shapes; smooth toppers.
Lighting
Choose Hardwired or Plug-in. Two T30 E26 LED bulbs, one at each end.
Hardwired includes 6.0 ft of suspension cord. Plug-in includes a 15.0 ft cord.
Materials & Modularity
Each shape is 3D printed in the selected filament. Fine layer lines and subtle variations in texture are part of the printing process.
The modular shapes connect with a twist-lock system. You can swap or rearrange compatible pieces while keeping the fixture’s required fit and clearances. Before making changes, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Follow the assembly instructions for your fixture, and never force a connection or alter the electrical components.
Have a qualified electrician handle hardwired installation and any work on electrical connections.
Placement & Care
Suspend securely in a dry indoor space, following the installation instructions for your fixture. Keep away from radiators, fireplaces, stoves and other heat sources. Avoid prolonged direct sunlight and locations where heat builds up, such as a hot window ledge or enclosed sunroom. Excessive heat may soften or distort the printed shapes. Keep away from water, splashes, steam and condensation. Do not use outdoors or in wet or damp locations. Do not drape fabric or other objects over the fixture.
Before cleaning, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Dust gently with a soft, dry cloth. Avoid solvents, abrasive cleaners and scrubbing. Do not sand, drill or heat the printed shapes. If a shape cracks, warps or no longer locks securely, stop using the fixture and contact the studio before using it again.
Specifications & installation
Use the installation instructions for your selected connection.
A horizontal pendant pairs a rounded stack with a double-faceted Tantrum stack across a frame. Pearl details follow the body shapes, while smooth Spill toppers finish both ends.
Shipping included.
Dimensions
Fixture: 9.5 in high × 41.0 in wide, excluding suspension cord and ceiling hardware.
Hardware width: 15.5 in.
Measurements are approximate and rounded up to the nearest 0.5 inch.
Shape composition
Choose a filament color for both stacks. From the hardware toward each topper: one end carries Pitt Small, Chonk Small and Spill Topper; the other carries two Tantrum Small shapes and Spill Topper.
Pearl details on the body shapes; smooth toppers.
Lighting
Choose Hardwired or Plug-in. Two T30 E26 LED bulbs, one at each end.
Hardwired includes 6.0 ft of suspension cord. Plug-in includes a 15.0 ft cord.
Materials & Modularity
Each shape is 3D printed in the selected filament. Fine layer lines and subtle variations in texture are part of the printing process.
The modular shapes connect with a twist-lock system. You can swap or rearrange compatible pieces while keeping the fixture’s required fit and clearances. Before making changes, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Follow the assembly instructions for your fixture, and never force a connection or alter the electrical components.
Have a qualified electrician handle hardwired installation and any work on electrical connections.
Placement & Care
Suspend securely in a dry indoor space, following the installation instructions for your fixture. Keep away from radiators, fireplaces, stoves and other heat sources. Avoid prolonged direct sunlight and locations where heat builds up, such as a hot window ledge or enclosed sunroom. Excessive heat may soften or distort the printed shapes. Keep away from water, splashes, steam and condensation. Do not use outdoors or in wet or damp locations. Do not drape fabric or other objects over the fixture.
Before cleaning, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Dust gently with a soft, dry cloth. Avoid solvents, abrasive cleaners and scrubbing. Do not sand, drill or heat the printed shapes. If a shape cracks, warps or no longer locks securely, stop using the fixture and contact the studio before using it again.
Specifications & installation
Use the installation instructions for your selected connection.
Image 1 of 79
Image 2 of 79
Image 3 of 79
Image 4 of 79
Image 5 of 79
Image 6 of 79
Image 7 of 79
Image 8 of 79
Image 9 of 79
Image 10 of 79
Image 11 of 79
Image 12 of 79
Image 13 of 79
Image 14 of 79
Image 15 of 79
Image 16 of 79
Image 17 of 79
Image 18 of 79
Image 19 of 79
Image 20 of 79
Image 21 of 79
Image 22 of 79
Image 23 of 79
Image 24 of 79
Image 25 of 79
Image 26 of 79
Image 27 of 79
Image 28 of 79
Image 29 of 79
Image 30 of 79
Image 31 of 79
Image 32 of 79
Image 33 of 79
Image 34 of 79
Image 35 of 79
Image 36 of 79
Image 37 of 79
Image 38 of 79
Image 39 of 79
Image 40 of 79
Image 41 of 79
Image 42 of 79
Image 43 of 79
Image 44 of 79
Image 45 of 79
Image 46 of 79
Image 47 of 79
Image 48 of 79
Image 49 of 79
Image 50 of 79
Image 51 of 79
Image 52 of 79
Image 53 of 79
Image 54 of 79
Image 55 of 79
Image 56 of 79
Image 57 of 79
Image 58 of 79
Image 59 of 79
Image 60 of 79
Image 61 of 79
Image 62 of 79
Image 63 of 79
Image 64 of 79
Image 65 of 79
Image 66 of 79
Image 67 of 79
Image 68 of 79
Image 69 of 79
Image 70 of 79
Image 71 of 79
Image 72 of 79
Image 73 of 79
Image 74 of 79
Image 75 of 79
Image 76 of 79
Image 77 of 79
Image 78 of 79
Image 79 of 79