Rounded Pitt and Chonk forms meet a smooth Spill topper beneath the socket. A looping cord suspends the compact pendant, with Pearl details across the body shapes.
Shipping included.
Dimensions
Body and socket: 16.0 in high × 4.0 in wide, excluding the flexible cord.
Measurements are approximate and rounded up to the nearest 0.5 inch.
Shape composition
Choose a filament color for the full stack. From the hardware toward the topper: Pitt Small, Chonk Small and Spill Topper.
Pearl details on the body shapes; smooth topper.
Lighting
Plug-in pendant with one T30 E26 LED bulb.
18.0 ft cord set overall, including socket and plug.
Materials & Modularity
Each shape is 3D printed in the selected filament. Fine layer lines and subtle variations in texture are part of the printing process.
The modular shapes connect with a twist-lock system. You can swap or rearrange compatible pieces while keeping the fixture’s required fit and clearances. Before making changes, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Follow the assembly instructions for your fixture, and never force a connection or alter the electrical components.
Have a qualified electrician handle hardwired installation and any work on electrical connections.
Placement & Care
Suspend securely in a dry indoor space, following the installation instructions for your fixture. Keep away from radiators, fireplaces, stoves and other heat sources. Avoid prolonged direct sunlight and locations where heat builds up, such as a hot window ledge or enclosed sunroom. Excessive heat may soften or distort the printed shapes. Keep away from water, splashes, steam and condensation. Do not use outdoors or in wet or damp locations. Do not drape fabric or other objects over the fixture.
Before cleaning, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Dust gently with a soft, dry cloth. Avoid solvents, abrasive cleaners and scrubbing. Do not sand, drill or heat the printed shapes. If a shape cracks, warps or no longer locks securely, stop using the fixture and contact the studio before using it again.
Specifications & installation
Use the installation instructions for your selected connection.
Rounded Pitt and Chonk forms meet a smooth Spill topper beneath the socket. A looping cord suspends the compact pendant, with Pearl details across the body shapes.
Shipping included.
Dimensions
Body and socket: 16.0 in high × 4.0 in wide, excluding the flexible cord.
Measurements are approximate and rounded up to the nearest 0.5 inch.
Shape composition
Choose a filament color for the full stack. From the hardware toward the topper: Pitt Small, Chonk Small and Spill Topper.
Pearl details on the body shapes; smooth topper.
Lighting
Plug-in pendant with one T30 E26 LED bulb.
18.0 ft cord set overall, including socket and plug.
Materials & Modularity
Each shape is 3D printed in the selected filament. Fine layer lines and subtle variations in texture are part of the printing process.
The modular shapes connect with a twist-lock system. You can swap or rearrange compatible pieces while keeping the fixture’s required fit and clearances. Before making changes, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Follow the assembly instructions for your fixture, and never force a connection or alter the electrical components.
Have a qualified electrician handle hardwired installation and any work on electrical connections.
Placement & Care
Suspend securely in a dry indoor space, following the installation instructions for your fixture. Keep away from radiators, fireplaces, stoves and other heat sources. Avoid prolonged direct sunlight and locations where heat builds up, such as a hot window ledge or enclosed sunroom. Excessive heat may soften or distort the printed shapes. Keep away from water, splashes, steam and condensation. Do not use outdoors or in wet or damp locations. Do not drape fabric or other objects over the fixture.
Before cleaning, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Dust gently with a soft, dry cloth. Avoid solvents, abrasive cleaners and scrubbing. Do not sand, drill or heat the printed shapes. If a shape cracks, warps or no longer locks securely, stop using the fixture and contact the studio before using it again.
Specifications & installation
Use the installation instructions for your selected connection.
Image 1 of 40
Image 2 of 40
Image 3 of 40
Image 4 of 40
Image 5 of 40
Image 6 of 40
Image 7 of 40
Image 8 of 40
Image 9 of 40
Image 10 of 40
Image 11 of 40
Image 12 of 40
Image 13 of 40
Image 14 of 40
Image 15 of 40
Image 16 of 40
Image 17 of 40
Image 18 of 40
Image 19 of 40
Image 20 of 40
Image 21 of 40
Image 22 of 40
Image 23 of 40
Image 24 of 40
Image 25 of 40
Image 26 of 40
Image 27 of 40
Image 28 of 40
Image 29 of 40
Image 30 of 40
Image 31 of 40
Image 32 of 40
Image 33 of 40
Image 34 of 40
Image 35 of 40
Image 36 of 40
Image 37 of 40
Image 38 of 40
Image 39 of 40
Image 40 of 40