Three Pearl-detailed stacks hang from a slim canopy. Rounded Pitt and Chonk forms sit beside a tapered Hennin and faceted Tantrum, with smooth Spill toppers throughout.
Shipping included.
Dimensions
Canopy: 36.0 in long × 6.0 in wide × 1.0 in deep.
Each pendant: 16.0 in high. Widths: 4.0 / 4.0 / 5.5 in.
Pendant measurements exclude their suspension cords.
Measurements are approximate and rounded up to the nearest 0.5 inch.
Shape composition
Choose a filament color for all three stacks. Listed from the hardware toward each topper.
Pendant 1: Pitt Small, Chonk Small and Spill Topper.
Pendant 2: Pitt Small, Hennin Small and Spill Topper.
Pendant 3: Tantrum Small, Tantrum Small and Spill Topper.
Pearl details on the body shapes; smooth toppers.
Lighting
Hardwired ceiling fixture with 3 T30 E26 LED bulbs.
Includes 6.0 ft of cord per pendant. Each drop adjusts independently.
Materials & Modularity
Each shape is 3D printed in glass-fiber-reinforced PETG, a polymer composite. Fine layer lines and subtle variations in texture are part of the printing process.
The modular shapes connect with a twist-lock system. You can swap or rearrange compatible pieces while keeping the fixture’s required fit and clearances. Before making changes, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Follow the assembly instructions for your fixture, and never force a connection or alter the electrical components.
Have a qualified electrician handle hardwired installation and any work on electrical connections.
Placement & Care
Suspend securely in a dry indoor space, following the installation instructions for your fixture. Keep away from radiators, fireplaces, stoves and other heat sources. Avoid prolonged direct sunlight and locations where heat builds up, such as a hot window ledge or enclosed sunroom. Excessive heat may soften or distort the printed shapes. Keep away from water, splashes, steam and condensation. Do not use outdoors or in wet or damp locations. Do not drape fabric or other objects over the fixture.
Before cleaning, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Dust gently with a soft, dry cloth. Avoid solvents, abrasive cleaners and scrubbing. Do not sand, drill or heat the printed shapes. If a shape cracks, warps or no longer locks securely, stop using the fixture and contact the studio before using it again.
Specifications & installation
Use the installation instructions for your selected connection.
Three Pearl-detailed stacks hang from a slim canopy. Rounded Pitt and Chonk forms sit beside a tapered Hennin and faceted Tantrum, with smooth Spill toppers throughout.
Shipping included.
Dimensions
Canopy: 36.0 in long × 6.0 in wide × 1.0 in deep.
Each pendant: 16.0 in high. Widths: 4.0 / 4.0 / 5.5 in.
Pendant measurements exclude their suspension cords.
Measurements are approximate and rounded up to the nearest 0.5 inch.
Shape composition
Choose a filament color for all three stacks. Listed from the hardware toward each topper.
Pendant 1: Pitt Small, Chonk Small and Spill Topper.
Pendant 2: Pitt Small, Hennin Small and Spill Topper.
Pendant 3: Tantrum Small, Tantrum Small and Spill Topper.
Pearl details on the body shapes; smooth toppers.
Lighting
Hardwired ceiling fixture with 3 T30 E26 LED bulbs.
Includes 6.0 ft of cord per pendant. Each drop adjusts independently.
Materials & Modularity
Each shape is 3D printed in glass-fiber-reinforced PETG, a polymer composite. Fine layer lines and subtle variations in texture are part of the printing process.
The modular shapes connect with a twist-lock system. You can swap or rearrange compatible pieces while keeping the fixture’s required fit and clearances. Before making changes, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Follow the assembly instructions for your fixture, and never force a connection or alter the electrical components.
Have a qualified electrician handle hardwired installation and any work on electrical connections.
Placement & Care
Suspend securely in a dry indoor space, following the installation instructions for your fixture. Keep away from radiators, fireplaces, stoves and other heat sources. Avoid prolonged direct sunlight and locations where heat builds up, such as a hot window ledge or enclosed sunroom. Excessive heat may soften or distort the printed shapes. Keep away from water, splashes, steam and condensation. Do not use outdoors or in wet or damp locations. Do not drape fabric or other objects over the fixture.
Before cleaning, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Dust gently with a soft, dry cloth. Avoid solvents, abrasive cleaners and scrubbing. Do not sand, drill or heat the printed shapes. If a shape cracks, warps or no longer locks securely, stop using the fixture and contact the studio before using it again.
Specifications & installation
Use the installation instructions for your selected connection.
Image 1 of 63
Image 2 of 63
Image 3 of 63
Image 4 of 63
Image 5 of 63
Image 6 of 63
Image 7 of 63
Image 8 of 63
Image 9 of 63
Image 10 of 63
Image 11 of 63
Image 12 of 63
Image 13 of 63
Image 14 of 63
Image 15 of 63
Image 16 of 63
Image 17 of 63
Image 18 of 63
Image 19 of 63
Image 20 of 63
Image 21 of 63
Image 22 of 63
Image 23 of 63
Image 24 of 63
Image 25 of 63
Image 26 of 63
Image 27 of 63
Image 28 of 63
Image 29 of 63
Image 30 of 63
Image 31 of 63
Image 32 of 63
Image 33 of 63
Image 34 of 63
Image 35 of 63
Image 36 of 63
Image 37 of 63
Image 38 of 63
Image 39 of 63
Image 40 of 63
Image 41 of 63
Image 42 of 63
Image 43 of 63
Image 44 of 63
Image 45 of 63
Image 46 of 63
Image 47 of 63
Image 48 of 63
Image 49 of 63
Image 50 of 63
Image 51 of 63
Image 52 of 63
Image 53 of 63
Image 54 of 63
Image 55 of 63
Image 56 of 63
Image 57 of 63
Image 58 of 63
Image 59 of 63
Image 60 of 63
Image 61 of 63
Image 62 of 63
Image 63 of 63