The original Scar composition. A tall sequence of tapered Hennin, rounded Chonk, elongated Pitt and faceted Tantrum forms rests on a nickel disc base, finished with the smooth Spill topper. Frosted Brown glass-fiber-reinforced PETG shapes carry Pearl details, with a smooth Spill topper on every stack.
Totem 39 from the Scar collection. Shipping included.
Hardware: Nickel. Connection: Plug-in.
Listed from the hardware toward the topper.
Stack
Hennin Medium: Frosted Brown with Pearls
Chonk Medium: Frosted Brown with Pearls
Pitt Medium: Frosted Brown with Pearls
Tantrum Medium: Frosted Brown with Pearls
Chonk Medium: Frosted Brown with Pearls
Hennin Small: Frosted Brown with Pearls
Spill Topper: Frosted Brown
Each shape is 3D printed in glass-fiber-reinforced PETG, a polymer composite. Fine layer lines and subtle variations in texture are part of the printing process.
The modular shapes connect with a twist-lock system. You can swap or rearrange compatible pieces while keeping the fixture’s required fit and clearances. Before making changes, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Follow the assembly instructions for your fixture, and never force a connection or alter the electrical components.
Have a qualified electrician handle hardwired installation and any work on electrical connections.
Place on a stable, level surface in a dry indoor space. Keep away from radiators, fireplaces, stoves and other heat sources. Avoid prolonged direct sunlight and locations where heat builds up, such as a hot window ledge or enclosed sunroom. Excessive heat may soften or distort the printed shapes. Keep away from water, splashes, steam and condensation. Do not use outdoors or in wet or damp locations. Do not drape fabric or other objects over the fixture.
Before cleaning, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Dust gently with a soft, dry cloth. Avoid solvents, abrasive cleaners and scrubbing. Do not sand, drill or heat the printed shapes. If a shape cracks, warps or no longer locks securely, stop using the fixture and contact the studio before using it again.
The original Scar composition. A tall sequence of tapered Hennin, rounded Chonk, elongated Pitt and faceted Tantrum forms rests on a nickel disc base, finished with the smooth Spill topper. Frosted Brown glass-fiber-reinforced PETG shapes carry Pearl details, with a smooth Spill topper on every stack.
Totem 39 from the Scar collection. Shipping included.
Hardware: Nickel. Connection: Plug-in.
Listed from the hardware toward the topper.
Stack
Hennin Medium: Frosted Brown with Pearls
Chonk Medium: Frosted Brown with Pearls
Pitt Medium: Frosted Brown with Pearls
Tantrum Medium: Frosted Brown with Pearls
Chonk Medium: Frosted Brown with Pearls
Hennin Small: Frosted Brown with Pearls
Spill Topper: Frosted Brown
Each shape is 3D printed in glass-fiber-reinforced PETG, a polymer composite. Fine layer lines and subtle variations in texture are part of the printing process.
The modular shapes connect with a twist-lock system. You can swap or rearrange compatible pieces while keeping the fixture’s required fit and clearances. Before making changes, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Follow the assembly instructions for your fixture, and never force a connection or alter the electrical components.
Have a qualified electrician handle hardwired installation and any work on electrical connections.
Place on a stable, level surface in a dry indoor space. Keep away from radiators, fireplaces, stoves and other heat sources. Avoid prolonged direct sunlight and locations where heat builds up, such as a hot window ledge or enclosed sunroom. Excessive heat may soften or distort the printed shapes. Keep away from water, splashes, steam and condensation. Do not use outdoors or in wet or damp locations. Do not drape fabric or other objects over the fixture.
Before cleaning, switch off and allow the fixture to cool; unplug plug-in fixtures or switch off power at the circuit breaker for hardwired fixtures. Dust gently with a soft, dry cloth. Avoid solvents, abrasive cleaners and scrubbing. Do not sand, drill or heat the printed shapes. If a shape cracks, warps or no longer locks securely, stop using the fixture and contact the studio before using it again.
